TL-113 Partial Annealing Machine
Tongli Machinery annealing machine is designed to anneal heating elements to enhance ductility and make a good preparation for bending after the tube is annealed.
Detailed Product Description
Tongli Machinery TL-113 Partial annealing machine is used to make the annealled parts of the elements tube to increase the temperature by inputting low voltage and strong current. And then the annealled parts will cool in the air to get the purpose of anneal when the current is cut off. It can enhance the ductility and make a good preparation for bending after the tube is annealed.
Spot annealing machine has two pairs of electrodes in the left and right direction. Because the distance between the two electrodes can be adjusted and the anneal tube length also can be adjusted. The machine is controlled by PLC, and you can set the temperature in the temperature control meter to annealing tube. Press the foot switch, the cylinder will push the electrodes to clamp the heating elements in the electrodes. The cylinder will move back to the original position after annealing and the heating elements will unload automatically. It is convenient to change the output voltage, electric current to adapt anneal of different materials and tube length according to adjustment of the current and time.
*Use infrared temperature sensor.
*Fast annealing speed.
Functions:
- Heating the tube surface by low voltage high-current short so that the MgO & heater will get little heat.
- Time relay controls the annealing time.
- Eight kinds of power and voltage can apply to various specifications of tubes.
- Pneumatic clamping, safe and convenient.
- Flexible design of collet, there will be little bend when there is heat extension.
Main technical parameters:
- Power supply: Tri-phase 380V, 50Hz.
- Air supply: 5-7 kg/cm2.
- Rated power: 30KW.
- Applicable tube diameter: 6mm-20mm.
- Applicable tube length: 150 mm -1500 mm.
- Size(L*W*H): 1500*600*1500(mm).
- Weight: 500kg.
Required information when ordering our TL-113 Spot annealing machine
*Tube diameter.
*Tube length.
*Tube material.
*Electrical supply (for example, single phase 220v 50hz).
Notes: All the information above, which may be subject to change, is offered solely for your reference, and should not be taken as a warranty or representation for which we assume any legal responsibility.
WARRANTY | Machine for one year, electric parts for half a year, wearing parts are not included. |
---|---|
PAYMENT | 50% advance payment, 50% before shipment. |
DELIVERY TIME | Normally in 60 days after getting advance payment and all the technical parameters we request. But it depends on how many machines you wish to purchase. |
PACKING DETAILS | Merchandise is packed in sea worthy and weather proof firm wooden box. |